Sofa bed dimensions and how to measure your room
Measure a sofa bed closed and open, then check the sleeping surface and delivery route. Compare eight Furver sizes for a living room or spare room.

Start with the closed footprint, then check how far the sofa bed reaches while it opens and once it’s fully open. Furver’s Manly Fabric 2.5-seater is listed at 1,850 mm wide and 970 mm deep when closed. The Manly Electric 2.5-seater adds 350 mm of width and 130 mm of depth. Ask for the usable sleeping width and length, and the dimensions of the largest packed piece.
Mark both layouts on the floor. A sofa bed can clear the coffee table when you sit down and still block the way to the balcony once a guest has opened it.
The tables below separate what you can check on a floor plan from the measurements you need from the seller.
Which sofa bed dimensions to ask for
Write the model, size and position beside each figure. An adjustable sofa may have several depths, even before you make up the bed.
| Measurement | What it describes | What you can decide from it |
|---|---|---|
| Closed overall width, depth and height | The outside of the sofa in the stated seating position | Whether it fits between walls, furniture and windows |
| Space during opening and once fully open | The furthest points reached during conversion and the final open footprint | Where the table can go and whether doors still open |
| Usable sleeping width and length | The part of the furniture intended for sleeping | Whether the sleeping area fits the guest and their bedding |
| Largest package or delivered section | The piece the delivery team needs to bring inside | Whether it will clear doors, lifts, stairs and turns |
Product width can include the arms. Use the separate sleeping width and length to choose bedding, and the packed dimensions to work out access.
Closed dimensions for eight Furver options
These are the published overall width, depth and height figures for the listed seating positions, recorded on 21 November 2026. Use the table for the closed layout. Ask separately for the opened measurements and carton sizes.
| Furver model | Listed size | Overall width × depth × height |
|---|---|---|
| Manly Fabric Sofa Bed | 1-Seater | 1,250 × 970 × 970 mm |
| Manly Fabric Sofa Bed | 2-Seater | 1,550 × 970 × 970 mm |
| Manly Fabric Sofa Bed | 2.5-Seater | 1,850 × 970 × 970 mm |
| Manly Electric Sliding Fabric Sofa Bed | 2.5 Seater | 2,200 × 1,100 × 1,020 mm |
| Manly Electric Sliding Fabric Sofa Bed | 3 Seater | 2,400 × 1,100 × 1,020 mm |
| Manly Electric Sliding Fabric Sofa Bed | 3.5 Seater | 2,740 × 1,100 × 1,020 mm |
| Nara Sofa Bed | Medium | 980 × 800 × 730 mm |
| Nara Sofa Bed | Large | 1,250 × 830 × 730 mm |
The Manly Fabric 2-seater sofa bed is 300 mm narrower than the 2.5-seater. That may leave room for a side table. Check the forward clearance separately because both have the same listed closed depth.
The Manly Fabric 2.5-seater sofa bed is listed at 1,850 mm wide. The 2.5-seater Manly Electric is 2,200 mm wide and starts 130 mm deeper than the Fabric version. Use the measurements for the exact model when you mark the floor.
The Manly Electric 3-seater sofa bed is 2,400 mm wide. Its 3.5-seater sofa bed option needs another 340 mm along the wall. Check that you can still step through a nearby doorway or pull out a dining chair.
If you need a single sofa bed, you can shortlist the Manly Fabric 1-seater. Confirm the actual sleeping measurements before buying a standard Australian single sheet. Do the same with Nara’s Medium and Large since those labels identify product sizes.
Nara Medium has the smallest closed footprint in the table. Check how easy it is for the regular user to stand from its low seat.
How to measure for a sofa bed at home
Start with the furniture you plan to keep. Use paper markers or removable tape suited to the floor finish.
1. Mark door swings, cupboards, windows and power points. Measure between the faces of actual obstacles, including projecting handles and ledges.
2. Mark the closed sofa at its widest points, including the arms. Set out the coffee table and dining chairs as you normally use them.
3. Mark the full opened position in a different colour. Add any gap needed behind the sofa and the place where you stand to operate it.
4. Move the table and loose cushions to the spots they would occupy overnight. Check that nothing blocks the door or the route to the bathroom.
5. Start where your guest’s feet will hit the floor. Try the routes to the door, the light switch and their bag. Open the nearest cupboard while the bed is out.
6. Check that you can reach the parts needed to close the bed. Put the furniture back and set aside room for the pillows and spare doona.
Try this with someone else using the lounge or dining table. Their feet and chair can take up the gap you were counting on.
The small living room layout guide can help you find another place for the coffee table or side table if either outline is cramped.
How to read sofa bed sleeping dimensions
Sofa bed sleeping dimensions are the usable width and head-to-foot length in the intended bed setup. Ask which way the guest lies and whether any raised cushion or arm sits within the listed numbers.
The Manly Fabric 2-seater and 2.5-seater drawings label 2,020 mm as the overall extended length and allow for a possible 10 cm measurement margin. Confirm the full operating space if your room is tight and request the actual usable sleeping length separately.
The Manly Electric drawing gives adjustable seat-depth figures. Nara’s drawing gives seating dimensions. Ask for the sleeping width and length for your selected option before you buy sheets or plan for a particular guest.
If you can try the bed open, lie down, feel where the joins sit and get up from the side you would have access to at home. Check whether the guest can reach the floor comfortably from that edge.
How to compare sofa bed seat depth
Measure sofa bed seat depth from the front edge of the seat to the front of the back cushion. Leave any usual cushions in place.
Measure a seat you already like the same way. Use that number as a starting point, then check whether your feet reach the floor or whether you want extra room to tuck your legs up.
The Manly Electric drawing lists 600 mm and 1,150 mm for seat depth. Ask which settings and cushions those figures refer to. Use the confirmed full outline for your open-bed plan.
Nara lists a 550 mm seat depth. Its published seat heights are 270 mm for Medium and 250 mm for Large. Manly Fabric drawings show 460 mm, and the Manly Electric drawing shows 455 mm. Cushion compression can change how that height feels when you sit.
Try sitting down and standing up in the setting you would use most often. Consider whether any regular user would find a low seat difficult to get out of.
Room layouts for a sofa bed
A sofa bed for an apartment living room
In a Zetland apartment, for example, the lounge may also be the route to the balcony. With the bed marked out, open the balcony door and pull out the nearest dining chair. Give both regular routes room before deciding where to move the table.
Use the table to shortlist widths first. With a narrower Manly Fabric or Nara on your list, ask how far each one extends into the room. Make the same check if you prefer the deeper, adjustable Manly Electric.
Put the lamp and a spot for a phone within reach of the bed. If the sofa needs power, use a placement and cable route allowed by its installation instructions.
A sofa bed for a spare room or home office
Pull the desk chair out as if you’re working and open the filing drawer. Then mark the bed and work out where the chair and any loose cushions can go when someone stays.
Leave space for an open suitcase and check that your guest can reach the cupboard. If you need the room for work in the morning, decide whether you can leave the bed open.
Work out how much floor space is left
Measure from the sofa wall to the opposite wall and subtract the open depth plus the depth of any furniture facing it. Include any gap the sofa needs behind it in the measurement from the sofa wall.
Suppose that distance between walls is 3,300 mm and the opposite cupboard projects 450 mm. If the bed needs 2,100 mm from the sofa wall to the front edge when open, 3,300 − 450 − 2,100 leaves 750 mm.
These figures are for an example room. Use the measure left over to test the actual route and cupboard swing in your room. There is no universal walkway allowance in the calculation.
Check the delivery route
Walk the route from the loading point to the room. Ask the delivery team which access measurements they need to assess it.
At each doorway, measure the clear width and height with the door open. Include restrictions from handles, stops and trim. Photograph both approaches if there is a tight turn straight after the door.
For a lift, measure the door and the inside separately. Check the space to turn outside the lift and ask your building manager about the booking, loading bay and any floor protection the building requires.
On stairs, record the clear width past handrails, the landing dimensions and the ceiling height where it drops. The team needs to assess the turns as well as any single opening.
Get the dimensions and weight of the largest packed piece and check which parts arrive separately. Ask which components the maker permits you to detach.
Furver’s shipping and delivery policy says the product arrives packed and standard delivery excludes unboxing, assembly and packaging disposal. Share any tight spots and your measurements with the delivery team before ordering.
Measurements to keep with your order
Keep the exact size, closed dimensions, full operating outline, sleeping width and length, and largest packed piece together. If you still have only one or two of these numbers, ask for the rest before paying.
Sofa bed FAQs
Will a standard fitted sheet fit my sofa bed?
It will if the sheet fits the sleeping surface’s width, length and thickness. Measure with the sofa bed open and include any topper when you check the sheet’s pocket depth.
Can I fold away a sofa bed with the bedding still on?
Check the maker’s instructions to see whether a fitted sheet can stay on. Take off the doona, pillows and any topper before folding unless the maker allows them to stay in place.
How much wall space do Nara Medium and Large need?
The Nara Sofa Bed is listed at 980 mm wide in Medium and 1,250 mm wide in Large. That’s another 270 mm along the wall for Large. Ask for the usable sleeping width and length of your chosen size when planning for a guest.
Does the Manly Electric’s adjustable seat depth tell me how far it opens?
The seat-depth figures describe the adjustable sitting area. For the open-bed footprint, ask for the distance from the back of the sofa to its furthest front point as it opens and once it’s fully out. Mark both positions before you set the coffee table.
