Buying Guides

Lounge chair dimensions for a reading corner

Measure lounge chair dimensions, seat depth and space for an ottoman. Compare three Furver chairs and check the delivery route into a Sydney apartment.

7 min read
Vancouver Armchair from the Furver lounge chair range

Measure the chair’s overall width and depth, and leave room to swivel or use an ottoman. The Furver Vancouver Armchair is 720 mm wide and 790 mm deep. Tape out that footprint with the side table in place, then open the door and walk past.

Write down the space you have for the whole chair. Then measure the seat depth and height of a chair you already enjoy, so you have something to compare in a showroom.

Mark the chair and the walkway

Sketch the room and tape the outline of the chair on the floor. Mark where doors and cupboards swing open. Include the furniture, curtains and power points you plan to keep using.

Measure the opening at the chair’s widest point. A skirting board, window ledge or curtain can take up room at different heights. Stand inside the outline and check where your feet will go once you sit down.

In a Parramatta flat, the seat by the window might also be beside the route from the lounge to the balcony. Slide the door open and walk the route with a laundry basket. Move the chair outline if the turn is too tight.

If the chair is crowding out something you still need, see the small living room furniture guide for ways to rearrange seating, tables and storage.

Overall dimensions for three Furver chairs

The table uses Furver’s product listings and dimension drawings checked on 21 November 2026. The figures are outside measurements in millimetres. Plan turning room and check carton sizes separately.

Furver chairOverall width × depth × heightWhat to allow for
Vancouver Armchair720 × 790 × 900 mmThe narrowest frame in this comparison
Henry Swivel Chair930 × 1,030 × 860 mmSpace for the chair to swivel
Cloud Lounge Chair With OttomanChair 1,000 × 960 × 620 mm. Ottoman 580 × 580 × 290 mm.Floor space for both the chair and separate footrest

If you need a small armchair, start with Vancouver’s 720 mm width. Sit in it before you choose, especially if you like sitting with your legs tucked up.

Henry turns through 360 degrees. Trace where the arms and back will pass if you want to turn from the window towards the lounge.

Cloud sits lowest of the three and takes up the most width. Measure the spot for the ottoman as well as the chair.

How to measure armchair seat depth

Measure from the front edge of the seat to the face of the back cushion, with the cushions you use in place. Overall depth includes the frame and the back of the chair.

Vancouver’s listed seat depth is 500 mm. Its overall depth is 790 mm. Compare that 500 mm with the usable seat depth of a chair you’re comfortable sitting in. The cushioning can change how the same measurement feels.

For upright reading, sit back and rest your feet where you usually would. If the cushion presses behind your knees or you slide forward to reach the floor, try a shallower seat.

If you tend to curl up with a book, measure the width between the arms as well. Thick arms can take up much of the outside width.

If the chair is shared, ask the other regular user to try it the same way. They may need a different seat height even if they like the depth.

Check the seat height

Seat height runs from the floor to the top of the sitting surface. Furver’s drawings show an unloaded seat height of 460 mm for Vancouver and 540 mm for Henry. The cushions may sit lower once you put weight on them.

Sit down with your feet where they feel natural, then stand up. Check whether you can reach the floor from the back of the chair and how easily you can get up again.

Trying a high-back armchair

Check where the chair meets your shoulders when you sit the way you usually read. Seat height and the angle of the back affect where the cushion reaches, even on a high-back armchair.

Vancouver is one option to try for upright reading. Bring a book or hold your phone at your usual reading height, then check whether the head support reaches you if that matters to you.

Rest your elbows naturally and turn a page. If you’ll have a table next to the chair, try reaching for a mug and returning to your reading position.

Space for a lounge chair with an ottoman

Allow for the footrest while you’re using it and give it a place to sit between uses.

Cloud’s ottoman is 580 mm deep. Placed directly in front of the 960 mm chair with the edges touching, the two extend 1,540 mm from back to front. Add the gap you need for your legs and check whether you can still walk past. The 1,540 mm is a starting measurement for the sketch.

Tape out the chair and ottoman separately so you can move the outline. Test whether you can get into the seat and reach the main walkway with the ottoman where you’ll use it.

Try parking the ottoman beside the chair. Check whether you can still open the cupboard or reach the curtain. Use it as a spare seat only if the product is designed for sitting and the load limit suits.

Clearance for a moving chair

Measure the widest part of a swivel chair as it turns. Henry’s base is smaller than the outside of the chair, so check whether the arm or back could hit the wall, lamp or side table.

Ask for the drawing for your exact rocker or recliner and check all the positions you plan to use. Where a diagram gives overall length, also ask what gap is required behind the chair and beyond the footrest.

A powered chair needs a clear route to the power point. Follow its installation instructions and keep the lead clear of the walkway and moving parts.

Open the drawers and cupboards nearby during the layout test and pull the curtains all the way across.

Try the corner with a book and a lamp

Put a living room chair you already own in the spot you’ve marked. Sit down with what you usually read and see whether you can reach the lamp and put down a drink without leaning out of the seat.

Try the corner in daylight and after dark. If there’s glare at the window, change the angle of the seat. Move the lamp if your shoulder casts a shadow across the page.

Check the size of the side table at the top. The legs may clear the chair even when the tabletop catches its arm.

If you’ll use a rug, check that the chair and any moving base sit as directed. Keep the rug edge and floor lamp lead clear of where you’ll walk.

Three reading corner layouts

A narrow corner beside the sofa

Start with the Vancouver outline of 720 × 790 mm. Try the side table on the open side of the chair. If you angle the chair towards the sofa, measure how far the front corner now projects into the walkway.

Between the window and the lounge

Use Henry’s outline where you have room to turn from the window to face the sofa. Place the side table within reach of your reading position and out of the turn.

A footrest away from the walkway

Put Cloud’s ottoman on the quiet side of the room so nobody heading to the kitchen needs to walk between the two pieces. Try the low seat before you choose it for a long stretch of reading.

Measure the delivery route separately

Follow the route from the loading area to the room. Measure between the parts that project into the opening, including handles and handrails. In an apartment, note the lift door width and the inside dimensions separately.

On stairs, record the depth of each landing and any overhead obstruction. At a tight turn, measure the space on both sides of the opening so the delivery team can see whether there’s room to turn the carton.

Compare the route with the largest package. Ask which components arrive separately and which the delivery team can move safely in their packaging.

Furver’s shipping and delivery policy says furniture arrives in its original packaging. Assembly and packaging removal are separate jobs. Share any tight turns, lift bookings and photos of tricky landings when you arrange delivery to a Sydney apartment.

Test the layout through a normal day

Leave the taped outlines on the floor for a day. Notice what happens when someone opens a cupboard or walks through while you’re seated. If you keep stepping over the ottoman outline, change the layout before ordering.

Lounge chair measuring FAQs

How much space should I leave around the Henry Swivel Chair?

Measure across the chair’s widest point and allow for the arms and back through a full turn. Henry swivels 360 degrees. Try the side table at its intended height to see if an arm would catch it.

Can I move the Cloud ottoman out of the way between uses?

Try a spare spot beside the Cloud Lounge Chair. Mark where the ottoman will sit there and in front of the chair. Open the nearest cupboard or balcony door in both layouts so you can see which leaves the route clear.

Will the Vancouver Armchair fit through a narrow doorway?

Ask Furver for the packed dimensions of the Vancouver Armchair. Compare them with the doorway’s clear width, measured past handles and trim. If there’s a turn immediately inside, measure the landing on both sides of the turn.

Bring the idea home

Ready to keep exploring?

Browse the collection online, or visit Furver in Auburn to compare scale, comfort and finishes in person.